先進材料物性和應用

內容概要

作為第六屆先進材料物性和應用國際學術研討會的會議論文集，本書內容主要包括以下六個方面的最新研究進展：1)先進材料的制備和表征；2)先進功能材料的結構和物性；3)納米結構材料物理與化學；4)自旋電子學、氧化物電子學與信息材料；5)超導材料的物理特性和應用；6)計算機輔助材料設計。

書籍目錄

Part I Processing and Characterization for Advanced
Materials
 CeO2 Thin Films Grown on Glass Substrate from
Aqueous Solution and
 Their Optical Property
 Chihaya Kawai, Takashi Hashizume, Atushi Saiki,
Kiyoshi Terayama
 Preparation of the CeO2-TiO2 Composited Thin
Film Using the Aqueous
 Solution Containing the TiO2 Powder
 Takahiro Miura, Takashi Hashizume, Atsushi
Saiki, Kiyoshi Terayama
 Age-Hardening Behavior of AM60 and AZ61
Magnesium Alloys
 Yuhei Ebata, Mitsuaki Furui, Susumu Ikeno,
Kiyoshi Terayama, Seiji Saikawa, Katsuya Sakakibara
 Electrochemical Characteristics of Mg-9mass%Al
Alloy Immersed in Na2SO4 Solution
 Mihoko Hori, Mitsuaki Furui, Satoshi Sunada,
Susumu Ikeno, Kiyoshi Terayama, Seiji Saikawa
 Effect of Demolding Temperature on Aging
Behavior in Al-10mass%Si-Xmass%Mg
 Alloy Cast into Sand Mold
 Youhei Kano, Mitsuaki Furui, Susumu Ikeno,
Kiyoshi Terayama, Seiji Saikawa,
 Tomoyasu Yamaguchi
 Effect of Magnesium Content on Age Hardening in
AI-10%Si-X%Mg Casting Alloy
 Tomoyuki Kitamura, Tokimasa Kawabata, Mitsuaki
Furui, Kenji Matsuda,
 Susumu Ikeno, Kiyoshi Terayama, Seiji
Saikawa
 Stress Corrosion Cracking Evaluation Using Slow
Strain Rate Tensile Test
 in 60/40 Brass Worked by Torsion and
Back-Torsion Process
 Natsumi Kusa, Masahiro Shinsen, Mitsuaki Furui,
Susumu Ikeno, Satoshi Sunada,
 Atsuahi Saiki, Kiyoshi Terayama
 Effect of Aluminum Content on Ag-Hardening
Behavior in AZ System
 Magnesium Alloys Cast into Permanent Mold
 Kazuki Minami, Mitsuaki Furui, Susumu Ikeno,
Kiyoshi Terayama,Seiji Saikawa, Katsuya Sakakibara
 Effect of Pre-Aging on Two-Step Aging in
Al-10mass%Si-0.3mass%Mg Alloy
 Cast into Permanent Mold
 Ryuichi Morioka, Mitsuaki Furui, Susumu Ikeno,
Kiyoshi Terayama, Seiji Saikawa
……
PartII Structure and Properties of Advanced Functional
Materials
PartIII Physics and Chemistry of Nanostructure Materials
PartIV Spintronics Oxide Electronics and Information
Materials
PartV Physical Properties and Application of Superconductors
PartVI Computer Aided Materials Science

章節摘錄

版權頁：插圖：Abstract：AZ system magnesium alloys which were cast into gravity casting and included 3，6，9 and 12mass％aluminum wereinvestigated the changes in hardness and the microstructure evolution using Vickers hardness tester and optical microscopy.Specimens were solution treated at 688 or 708K for 86.4 or 259.2ks.Affer that，aging treatment was performed by threetemperatures of 423，473 and 523K.Specimens indicated age hardening obviously in all aging temperatures.In each AZ systemalloys.the peak hardness tended to increase by decreasing the aging temperature and increasing the aluminum content and the timeto reach the peak hardness was shogened with increasing the aging temperature.The volume fraction of discontinuous precipitationwhich increases with the passage of aging time was also increased by increasing the aluminum content.

編輯推薦

《先進材料物性和應用(英文)》是由上海大學出版社出版的。

圖書封面

評論、評分、閱讀與下載

---

    先進材料物性和應用 PDF格式下載

---