從失效到更好的設計、制造和建造

前言

　　Failures and accidents in industries have been repeatedly reported in the course of rapid development of national economy in China. As the Chinese saying goes， failure is the mother of success. The failure can advance our engineering knowledge than all the successful machines and structures in the world. Many theories were actually developed based on the lessons learned from failures. Fracture mechanics， as an example， were developed after a series of fracture failures in ships， aircrafts， pressure vessels and so on， which in turn has supported the successful development of many new products of high reliability. New failures in current extreme engineering will surely give birth to a new generation of theories. The 2012 International Symposium on Structural　　Integrity (ISSI2012) is thus held in Jinan， China during October 31-November 4， 2012 with the theme From Failure to Better Design， Manufacture and Construction.　　This book presents the proceedings of ISSI2012. As the successor of Fracture Mechanics symposium series (from 2003 to 2009)， ISSI2012， continues the tradition of small scale but of high quality in discussion and exchange. Various sessions are planned for presentations and discussions on theoretical aspects and practical applications in the area of structural integrity in general.　　The symposium (ISSI2012) is co-organized by member organizations of China Structural Integrity Consortium， including Shandong University， East China University of Science and Technology， National Engineering Research Center of Pressure Vessel and Pipeline Safety Technology (Hefei General Machinery Research Institute)， MOE Key Laboratory of Pressure Systems and Safety， Nanjing University of Technology， Zhejiang University， Zhejiang University of Technology， Zhengzhou University， Changsha University of Science and Technology， Southwest Jiaotong University， Beihang University and co-sponsored by China Pressure Vessel Institution， China Materials Institution， National Natural Science Foundation of China， General Administration of Quality Supervision， Inspection and Quarantine of China， Engineering and Technology Research Center for Special Equipment Safety of Shandong Province， MOE Key Laboratory of High Efficiency and Clean Mechanical Manufacture (SDU)， MOE Engineering Research Center of　　Large-scale Underground Cavern Group (SDU).　　On behalf of the organizing committee， we would like to thank the above co-organizers and co-sponsors who made ISSI2012 possible. We also wish to thank Professor George C. Sih and Professor Zhengdong Wang for their passion to the symposium and efforts made to ensure the success of the event.

內容概要

　　《從失效到更好的設計、制造和建造》是國際斷裂力學學會2012年結構完整性年會的論文集，全書收錄最新論文近100篇。論文內容均為機械結構研究領域，世界頂級的工程研究科學家最新的研究成果，并能引導該領域未來研究的方向。本書適合高水平科技圖書館的館藏圖書，也可適合該領域工程研究的研究生及相關科研人員的學習、交流、參考、借鑒之用。

書籍目錄

Preface
Anomalies of monoscale notion of failure in contrast to
multiscale character of failure for physical processes
 G. C. Sih
Revisio to the R5 and R6 structural integrity assessment
procedures
 R. A. Aiworth
A stochastic and local theory of fatigue for aging pressure
vessels and piping
 Jeffrey T. Fong, N. Alan Heckert, James J. Filliben
Predicting crack initiation and propagation in pressurized
aircraft structures
 Bob Farahmand, Frank Abdi, Kamran Nikbin
Quantitative damage assessment using guided ultrasonic waves
signals
 Lin Ye, Zhongqing Su, Ye Lu
Comparison of ductile failure predictio with experimental data
of multiple cracked plates and pipes
 Nak-Hyun Kim, Jong-Hyun Kim, Jun-Young Jeon, Han-Sang
Lee, Yun-Jae Kim, Kunio Hasegawa,
 Katsumasa Miyazaki
From structure integrity to system integrity resilience
 W. J. Zhang
Structural integrity assessment of welds using neutron
diffraction method
 Wanchuck Woo
A structural integrity assessment of an elbow subjected to
internal pressure, system moments and operating
at high temperature
 Jinhua Shi
Aging management of nuclear power plants in Korea
 Tae-Eun Jin
Local fracture properties and dissimilar weld integrity in
nuclear power systems
 Guozhen Wang, Haitao Wang, Fu-Zhen Xuan, Shan-Tung Tu
Neutron diffraction and numerical simulation to study the
cutting induced relaxation of weld residual stress
 Wenchun Jiang, Wanchuck Woo
Finite element analysis of HAZ effects on limit loads for
mismatched welded joints
 Kun Ling, Zhengdong Wang, Fu-Zhen Xuan
Mismatch effect on safety assessment of pressure pipe with
incomplete penetration defect
 Zhijiang Jin, Chenghang Jiang, Zhengping Jiang, Huailei
Yan
Research on root morphology regularization method of incomplete
penetration defect in pressure pipe
 Zhijiang Jin, Chenghang Jiang, Zhengping Jiang, Huailei
Yan
Modified h factor of center cracked panel specimen based on
three-dimeional finite element simulation
 Hui Liu, Changyu Zhou, Qiao Dai
Numerical investigation on the influence of cathode flow channel
depth on PEM fuel cell performance
 Jing Zhou, Jinzhu Tan, Xiaowei Zhang, Xuejia Hu, Guo Li,
Liufei Fan
Modeling and numerical analysis of the shape memory alloy
strip
 Pengtao Zhao, Jinhao Qiu, Huichen Yu
Finite element analysis of sealing chambe in a single-screw
pump
 Long Pan, Tianpeng Xi, Jinzhu Tan, Ruilin Chen, Jun
Hao
Application of three paramete interval finite element method to
uncertainty analysis of spherical tank
 Chao Li, Changhong Liu, Xinchuan Qin, Yongtai Li
Fatigue-fracture mechanism under larger stress and strain
conditio
 Jianhua Xiao
Correlation between pore structure and compression behavior of
porous sintered Cu-Ni-Cr alloy at elevated
temperatures
 Wei Li, Jian Chen, Zhuo He, Yanjie Ren, Wei Qiu, Jianjun
He, Jianlin Chen
The feasibility of research for shell deformatio with
isogeometric analysis
 Feng Chang, Weiqiang Wang, Rongjuan Sui, Pengfei Wang
Low cycle fatigue life prediction of GH909 superalloy at
elevated temperature
 Shichao Zhang, Huichen Yu, Ying Li, Yuxin Zhao
Effect of pitch difference on the fatigue strength of bolt and
nut based on the modeling coidering fitting
clearance
 Yoshikazu Sano, Xin Chen, Yu-lchiro Akaishi, Yasushi
Takase, Nao-aki Noda
Investigation on fatigue property of the A6N01 high strength
aluminum alloy
 Bo Ding, Shanglei Yang, Qinglin Lin, Xu Chao
Electrochemical behavior of passive film on 304 stainless steel
and chromaticity ipection method of film
quality
 Congqian Cheng, Tieshan Cao, Qinqin Fu, Dewei Deng, Jie
Zhao, Guanyu Song
Simulation of the elasto-plastic respoe and residual stresses
near metal surface due to laser shock processing
 Yao Fu, Xiancheng Zhang, Fu-Zhen Xuan, Zhengdong Wang,
Shan-Tung Tu
Microstructural characteristics of the oxides formed on zinc
contaminating stainless steel in high temperature
water
 Yan Zhao, Congqian Cheng, Zhiyuan Cao, Jie Zhao
Research on the properties of 20G steel with strain aging
embrittlement using indentation test
 Jie Tang, Weiqiang Wang, Mengli Li, Pengfei Wang,
Chenggong Su
Determination of reference temperature To for A508-III forging
using PCVN specime based on Beremin
toughness scaling model
 Yupeng Cao, Hu Hui, Fu-Zhen Xuan, Yinbiao He, Hui Li
Residual stress prediction for hot strip composite roll by
measuring the stress of the disk cut out from the roll
 Xu Wang, Nao-aki Noda, Yoshikazu Sano, Wen-hai Guan,
Yasushi Takase
Structural analysis on reinforcement for thick wall nozzle of
pressure vessels
 Mihan Liu, Le Jiao, Tong Liu
Safety analysis for nozzles of coldstreched austenitic stainless
steel pressure vessels
 Yunfei Zhang, Hu Hui, Peining Li
A study on welding technology and post-weld heat treatment of
SA543 steel
 Huaquan Bo, Xuedong Chen, Wanbo Dou, Xuemei Luo
Failure analysis of the pure zirconium hanging sample for acetic
anhydride reactor
 Pengfei Wang, Weiqiang Wang, Jie Tang, Feng Chang,
Xiandong Shang
Research on interval failure assessment diagram of industrially
pure titanium TA2
 Xiangwei Chen, Xiaohua He, Qiao Dai, Changyu Zhou
Atomistic simulation on crack growth in ct-Fe under high
temperature
 Tong Liu, Mihan Liu
Calculation of toughness fracture and its scatter with the ASME
reference curve
 Changjun Liu, Kaihua Jiang, Lijun Zheng, Peining Li
Path prediction of I+II mixed mode fatigue crack growth in
pressure vessels made from 16MnDR
 Huifang Li, Xiaoju Sun, Caifu Qian
Feature of magnetic memory signals of crack and incomplete
penetration in welding joints
 Pengiu Guo, Haijiang Zhao, Weihe Guan, Xuedong Chen
Study on the susceptibility of welding cold cracking in
SA543 steel
 Xuemei Luo, Xuedong Chen, Wanbo Dou, Huaquan Bo
Hyper singular integral equation method for a circular
crack in the brazed joint with a circular interface
 Chunwei Ma, Ding Ma, Peiquan Xu
Fracture toughness requirements of steam generator channel
head and disposition methods of
nonconformance case
 Hao Qian, Kefeng Zhang, Yizhou Zhu, Xingyun Liang,
Yinbiao He, Weida Yao
The stress distribution and critical crack length analysis
of a cracked multilayer urea reactor
 Huadong Liu, Weiqiang Wang, Aiju Li, Yan Liu,
Shugen Xu, Mengli Li, Ming Zhang
Pressure variation of BLEVE triggered by liquid release through
a crack in cylindrical pressure vessel
 Shugen Xu, Weiqiang Wang
Creep life assessment on two kinds of low-alloy steel based on
the omega method
 Haisheng Sun, Tong Xu, Xiangsai Feng, Kaishu Guan
Using a unified model of stress relaxation to predict creep
behavior
 Jinquan Guo, Wuzhou Meng, Long Tian, Huichao Shi, Bo
Liang
Effect of thermal and mechanical factor on type IV creep
cracking of P92 steel
 Xiaojun Hao, Xiaoguang Niu, Zhen Dai, Shangqian Jing,
Changfu Liu, Guozhen Dong
Effect of creep degradation on the magnetic domain and magnetic
properties of 10CrMo910 steel
 Su-Zhou Zhang, Shan-Tung Tu
Effect of pit defect size on creep life of pressure pipe at high
temperature
 Renliang Jin, Changyu Zhou, Jilin Xue, Zhifeng Yang
Assessment of C-integral for functionally graded materials
 Huan-Sheng Lai, Kee Bong Yoon, Shan-Tung Tu
Evaluation of creep properties by three-point bending tests with
small specime
 Fa-Kun Zhuang, Guo-Yan Zhou, Qiongqi Wang, Shan-Tung
Tu
On damage mechanism and life prediction ofthermo-mechanical
fatigue of Nickel based superalloy K417
 F. Liu, Z. G. Wang, S. H. Ai, S. W. Nam
Elasto-plastic dynamic time respoe and damage evaluation of a
part cable-stayed bridge under severe
earthquake
 Xuesong Tang, Xingye Chen, Fan Geng
Damage facto and modeling for plastic film subjected to rolling
contact fatigue used for full-open type
greenhouse
 Wanzhong Jiao, Yigen Zuo, Qifeng Luo, Nao-aki Noda,
Yoshikazu Sano
Hydrogen induced ductility loss of hydrogen-charged and
hydrogen-releasing 304L austenitic stainless steel
 Yanfei Wang, Jianming Gong, Yong Jiang, Wenchun Jiang,
Wang Jiang
Study on intergranular corrosion of 316L stainless steel
diffusion bonded joint
 Shuxin Li, Shurong Yu, Yanni He, Pengyi Zhang
Significance analysis on influential facto of stress corrosion
based on grey relational theory for stainless steels
 Rongjuan Sui, Weiqiang Wang, Yan Liu, Yanpeng Qu,
Songyong Chen
Feasibility analysis of the magnetic memory technology in the
detection of hydrogen damage
 Junfei Wu, Hao Zhang, Mei Lin, Xuping Zhang
The damage test ofQ235 steel under the affect of stress and
corrosion media
 Hao Zhang, Junfei Wu, Huaixiang Cao, Xuping Zhang
The effects of flowing solution on the corrosion of stainless
steel
 Tieshan Cao, Congqian Cheng, Jie Zhao
Pitting corrosion behavior of Q235B in various stress levels and
salt spray environments
 Huaixiang Cao, Xingqi Qiu, Mingda Song, Hao Zhang
Numerical analysis ofultirnate load for a marine riser
containing corrosion defects
 Rui Liang, Tao Zhou, Xin Cao, Fang Zhao
Investigation on corrosion under iulation (CUI) of 304 stainless
steel welded joints
 Xiaomin Bai, Jianqun Tang, Jianming Gong, Yingjie
Jiang
Pin-on-disc wear test and simulation of HA/ZrO2 composite
coating
 Lei Wu, Yumei Bao, Dongming Zhang, Guozhong Chai
Damage identification of pipeline structure based on curvature
modal difference and genetic algorithm
 Zhanfeng Hao, Shaoping Zhou, Aiqiang Cui, Quan Yuan
Inner surface defect ipection for thick wall pipe of austenitic
stainless steel based on ultrasonic TOFD
 Zhen Dai, Wei Li, Xiaojun Hao, Xiaoguang Niu, Shangqian
Jing, Jifeng Zhao
On-line monitoring method for centrifugal compressor and
impeller remanufacturing
 Ming Zhang, Weiqiang Wang, Yan Liu
Heat trafer model of underground heat exchanger in the
aquifer
 Wenling Liu, Yan Chen
Author index
Keywords index

編輯推薦

《從失效到更好的設計、制造和建造》是國際斷裂力學學會2012年結構完整性年會的論文集，今年論文主題“由失效到更好的設計、制造和構建”。

圖書封面

評論、評分、閱讀與下載

---

    從失效到更好的設計、制造和建造 PDF格式下載

---