System Verilog數字系統設計

內容概要

　　SystemVerilog是21世紀電子設計師必須掌握的最重要的語言之一，因?yàn)樗窃O(shè)計和驗證復雜電子系統核心芯片的重要手段。由馬克編寫的這本《System
Verilog
數字系統設計(影印版)》是用SystemVerilog語言設計并驗證數字系統的基本概念和具體方法。在介紹基本語法的基礎上，闡述了如何用
SystemVerilog構成數字電路、組件和系統，以及應該如何使用SystemVerilog搭建測試平臺，并對設計進行驗證。
《System Verilog數字系統設計(影印版)》既適合作電子、自動化和計算機專業本科生和研究生的教科書，也適合已經掌握
Verilog和VHDL硬件描述語言的工程師使用。

書籍目錄

List of Figures
List of Tables
Preface
Acknowledgments
About the Author
1.Introduction
2.Combinational Logic Design
3.Combinational Logic Using SystemVerilog Gate Models
4.Combinational Building Blocks
5.SystemVerilog Models of Sequential Logic Blocks
6.Synchronous Sequential Design
7.Complex Sequential Systems
8.Writing Testbenches
9.SystemVerilog Simulation
10.SystemVerilog Synthesis
11.Testing Digital Systems
12.Design for Testability
13.Asynchronous Sequential Design
14.Interfacing with the Analog World
A.SystemVerilog and Verilog
Awe to Selected Exercises
Bibliography
Index

章節摘錄

版權頁：   插圖：   3.5 Logic Values In the preceding description,we mentioned logic values and referred briefly to a high impedance state.SystemVerilog allows wires to take four possible values: 0,1,x (unknown),and z (high impedance).In general,logic gates are designed to generate 0 or 1 at the outputs,x usually indicates some kind of anomalous situation-perhaps an unimtialized flip-flop or a wire that is being driven to two different values by two gates simultaneously. The high-impedance state,z,is used to model the output of three-state buffers.The purpose of three-state buffers is to allow the outputs of gates to be connected together to form buses,for example.The x state is normally generated when different outputs from two gates are connected together.We would expect,however,that a 1 and a z (or a 0 and a z) driving the same wire would resolve to a 1 (or a 0).Clearly,therefore,not all logic values are equal. The unknown and high-impedance states can be written as lower case ("x" and "z") or upper case ("X" and "Z") characters.The question mark ("?") can be used as an alternative to the high-impedance state. 3.6 Continuous Assignments The two-input AND gate at the beginning of the chapter was written using a continuous assignment.In general,continuous assignments are used to assign values to nets.In later chapters,we will see that alwaya comb and always ff procedural blocks are more useful for describing synthesizable hardware.Continuous assignments are,on the other hand,the most convenient way to describe three-state buffers and to model delays in combinational logic.Three-state buffers will be discussed in more detail in the next chapter.This is an appropriate point,however,to discuss SystemVerilog operators.

編輯推薦

《國外電子信息精品著作:System Verilog數字系統設計(影印版)》既適合作電子、自動化和計算機專業本科生和研究生的教科書，也適合已經掌握Verilog和VHDL硬件描述語言的工程師使用。

圖書封面

評論、評分、閱讀與下載

---

    System Verilog數字系統設計 PDF格式下載

---