中國桉樹和相思人工林實木加工技術指南

內容概要

《Guide on Utilization of Eucalyptus and Acacia Plan》特點是以國際熱帶木材組織（ITTO）資助課題所研究的人工林桉樹（8種）和相思（2種）10個樹種分別為主線；從木材性質（包含木材解剖、木材密度和干縮、木材化學和力學性質等），木材機械加工特性到鋸解、干燥、膠合與指接技術等全面地進行闡述。便于讀者集中查找和使用某個樹種的材性和加工利用的信息，有利于科研成果的宣傳擴大和轉換。

書籍目錄

Ⅰ Eucalyptus citnodora  1  WOOD PROPERTIES    1.1  Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2  GROWTH STRESS  3  MACHINING PROPERTIES    3.1  Methods    3.2  Resuits and discussions    3.3 General conclusion　4 SAWING TECHNIQUES    4.1 Strain in sawing process    4.2 BOW deformation.    4.3 Sawing inaccuracy    4.4 The influence ofend-splits on lumber recovery    4.5 Pilot sawing  5  DRYING TECHNIQUES    5.1 Air drying    5.2 Drying characteristics    5.3 Drying schedule    5.4 Pilot drying test  6  ADHESION PRoPERTIES    6.1 Finger joint    6.2 Gluing.Ⅱ Eucalyptus exserta  1  WOOD PRoPERTlES    1.1  Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2  GROWTH STRESS  3  SAWING TECHNIQUES    3.1 Strain in sawing process    3.2  BOW deformation.    3.3 Sawing inaccuracy.    3.4 The influence ofend—splits on lumber recovery  4  DRYING TECHNIQUES    4.1 Air drying    4.2 Drying characteristics    4.3 Drying schedule　5 ADHESION PROPERTIES    5.1 Fingerjoint    5.2 GluingⅢ Eucalyptus urophylla×grandis  1  W00D PROPERTIES    1.1 Anatomical characteristics    1.2 Physical properties    1-3 Mechanical properties    1.4 Chemical properties  2 GROWTH STRESS  3 MACHINING PROPERTIES    3.1  Methods    3.2 Results and discussions    3.3 General conclusion  4 SAWING TECHNIQUES    4.1  Strain in sawing process    4.2 Bow deformation    4.3  Sawing inaccuracy    4.4 The influence of end-splits on lumber recovery  5  DRYING TECHNIQUES    5.1  Air drying    5.2 Drying characteristics    5-3 Drying schedule  6 ADHESION PROPERTIES    6.1 Fingerjoint    6.2 Materials    6 3  Method of experiments.    6 4 Result and discussionⅣ Eucalyptus grandis  1  WOOD PROPERTIES    1.1 Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2 GROWTH STRESS  3 SAWING TECHNIQUES    3.1  Strain in sawing process    3.2 Bow deformation    3.3 Sawing inaccuracy    3.4 The influence ofend-splits on lumber recovery　　……Ⅴ Eucalyptus urophyllaⅥ Eucalyptus cloezianaⅦ Eucalyptus pellitaⅧ Eucalyptus tereticornisⅨ Acacia mangiumⅩ Acacia auriculiformisREFERENCESPLATE

編輯推薦

《Guide on Utilization of Eucalyptus and Acacia Plan》由科學出版社出版。

圖書封面

評論、評分、閱讀與下載

---

    中國桉樹和相思人工林實木加工技術指南 PDF格式下載

---